Every Trade.One Trusted Source.

Home Energy & Insulation · Ireland

How to Keep Heat in Your Home and Save Energy in Ireland

Practical insulation, draught-proofing, ventilation and heating-control upgrades to reduce heat loss and make your Irish home warmer.

Home Energy & Insulation

Trade Source IRE guide to keeping heat in an Irish home through insulation, windows, heating controls and ventilation
Keep Heat in Your Home and Save Energy

Does your house feel freezing again shortly after the heating goes off?

You could be paying to heat the outdoors. The smartest way to create a warmer and more energy-efficient home is to stop heat escaping first, then improve how your heating and hot-water systems operate.

SEAI states that a home can lose up to 30% of its heat through poorly insulated roofs and walls, with further heat escaping through windows, doors and uninsulated floors.

Here are the most effective home improvements to consider.

1. Start with Attic and Roof Insulation

Heat rises, making the attic one of the first places to check.

Attic or rafter insulation is generally one of the most cost-effective home-energy upgrades available. Even where insulation is already present, it may be too thin, damaged, compressed or badly installed.

SEAI recommends insulating at ceiling level where the attic is mainly used for storage. Where the attic is a habitable room, insulation may be installed at rafter level instead. Proper roof ventilation must still be maintained to prevent moisture from building up.

Find insulation contractors across Ireland for attic, rafter, wall and floor-insulation enquiries.

2. Insulate Your External Walls

External walls can account for a major share of heat loss in an Irish home.

The right option depends on how the house was built:

  • Cavity-wall insulation fills the gap between suitable cavity walls.
  • Internal wall insulation, often called dry lining, adds insulation inside the external walls.
  • External wall insulation, commonly known as “the wrap”, places insulation around the outside of the house before applying a new rendered finish.

External insulation can improve comfort and weather protection while giving the property a fresh appearance. Internal insulation may suit homes where external work is unsuitable, but it reduces some internal floor area and can be disruptive.

A contractor should assess the wall construction, damp condition and ventilation before recommending a system. SEAI notes that the correct method depends on the house type, existing walls and budget.

Read the Trade Source IRE guide to insulation, retrofitting and improving your BER.

3. Stop Draughts Around Windows and Doors

Not every cold room needs a full set of replacement windows.

Start by checking for:

  • Gaps around window and door frames
  • Worn seals
  • Draughts beneath external doors
  • Poorly sealed letterboxes and keyholes
  • Gaps around the attic hatch
  • Open or unused fireplaces
  • Unsealed openings around pipes and cables

Simple draught-proofing can improve comfort quickly. Close curtains in the evening, but make sure they are not covering radiators and trapping heat behind them.

Never permanently block ventilation openings, particularly in rooms with gas, oil or solid-fuel appliances.

Where the windows or doors are damaged, badly fitted or performing poorly, replacement units may reduce draughts and heat loss. Compare the U-value, installation method, ventilation, making-good work and warranty—not just the headline price. SEAI says windows and doors can account for around 10% of household heat loss.

Find window and door specialists in Ireland for replacement windows, front doors, patio doors and glazing upgrades.

4. Consider Floor Insulation

Cold floors can make an otherwise heated room feel uncomfortable.

SEAI estimates that up to 10% of a home’s heat may be lost through uninsulated floors. The right solution depends on whether the property has suspended timber floors, concrete floors or another construction type.

Floor insulation is often worth considering when:

  • Replacing flooring
  • Renovating the ground floor
  • Installing underfloor heating
  • Building an extension
  • Carrying out a deeper home retrofit

Suspended timber floors require careful detailing so necessary subfloor ventilation is not blocked.

5. Upgrade Your Heating Controls

Even a well-insulated house can waste energy when the heating is running at the wrong times.

Modern heating controls can allow you to:

  • Set different heating times for weekdays and weekends
  • Control upstairs and downstairs separately
  • Heat your water without turning on every radiator
  • Reduce the temperature in spare rooms
  • Use thermostatic radiator valves
  • Stop the boiler when the chosen temperature is reached
  • Control the immersion using a timer

SEAI says suitable heating controls can reduce home-heating energy use by up to 20% by matching heating and hot-water schedules to how the home is actually used.

Find plumbers and heating professionals or electricians across Ireland for heating controls, wiring and related upgrades.

6. Maintain Your Boiler, Radiators and Hot Water

If one radiator is roasting while another is barely warm, the system may need more than simply turning up the thermostat.

Useful heating-system maintenance can include:

  • Annual boiler servicing
  • Radiator bleeding and balancing
  • Magnetic-filter cleaning
  • Heating-system inhibitor checks
  • Pipe insulation in the attic, garage or hot press
  • Insulating an older hot-water cylinder
  • Installing an immersion timer
  • Investigating sludge and circulation problems

SEAI recommends annual boiler servicing and advises homeowners to use timers and temperature controls so water is not heated for longer—or to a higher temperature—than necessary.

Read the Trade Source IRE guides to gas boiler servicing and heating-system maintenance and plumber and heating costs in Ireland.

Where the existing heating system is approaching the end of its life, improve the insulation first and then assess options such as an efficient replacement boiler or heat pump.

Read our heat pumps Ireland 2026 guide before choosing a new heating system.

7. Do Not Forget Ventilation

Keeping heat inside does not mean sealing the house completely.

As insulation and airtightness improve, suitable ventilation becomes increasingly important. It removes excess moisture, cooking fumes and stale air while helping to reduce condensation and mould.

Do not block vents without professional advice. A properly planned upgrade should improve both energy efficiency and indoor air quality.

8. Make Simple Energy-Saving Changes

You do not need to carry out a full retrofit before reducing energy use.

Practical changes include:

  • Turn the thermostat down by 1°C
  • Turn down radiators in unused rooms
  • Set heating timers around your actual routine
  • Close doors between heated and unheated rooms
  • Close curtains in the evening
  • Run full washing-machine and dishwasher loads
  • Wash suitable clothes at 30°C
  • Replace failed bulbs with LEDs
  • Use an immersion timer
  • Switch appliances off instead of leaving them on standby
  • Boil only the water you need in the kettle

SEAI says reducing your room temperature by 1°C could lower heating energy use by around 10%.

Use Your BER as an Upgrade Roadmap

A Building Energy Rating and its accompanying Advisory Report can help identify where your home is losing energy and which upgrades may provide the greatest benefit.

For many properties, the sensible order is:

  1. Reduce heat loss through insulation and draught-proofing.
  2. Improve ventilation where necessary.
  3. Upgrade heating controls and the heating system.
  4. Consider renewable technologies such as heat pumps or solar PV.

Read the Trade Source IRE guide to BER ratings in Ireland and how to improve your result.

Before beginning grant-supported work, check the Trade Source IRE SEAI Grants Ireland 2026 guide. Grant approval may need to be in place before work begins, and the contractor may need to be registered for the specific measure.

How Trade Source IRE Can Help with Your Home-Energy Upgrade

A complete energy upgrade can involve several trades. You may need an insulation contractor for the attic, a builder for structural or ventilation work, a plumber for heating controls, an electrician for wiring and a window installer for draughty frames or doors.

Instead of spending days ringing around, you can send your project details to Trade Source IRE once.

Trade Source IRE will review the location, type of work and preferred timeframe, then help route the enquiry towards potentially suitable trade professionals where available. It is free to submit an enquiry, there is no obligation to proceed and you remain in control of comparing quotations and choosing who gets the job.

Trades we can help you find

Contractors applying to the Trade Source IRE network are reviewed before joining. Customers should still confirm insurance, qualifications, registrations, certificates, product specifications, warranties and suitability before work begins.

Get Your Enquiry Moving

When submitting your project, include:

  • Your county, town or Eircode area
  • The age and type of property
  • Your current BER, where available
  • The areas where you notice draughts or heat loss
  • Your current heating system
  • Photos, measurements or plans
  • Your preferred timeframe
  • Whether the project is connected to an SEAI grant

Clear information helps Trade Source IRE understand the work and route the enquiry more effectively.

Submit your home-energy upgrade project to Trade Source IRE

Insulate first. Control the heating properly. Keep more valuable warmth inside your home.

Every Trade. One Trusted Source.

Information Sources

This article provides general information. The most suitable insulation, ventilation, heating and energy-saving measures depend on the age, construction, condition and use of the individual property.